This convenient new option is an auto leveling system that adjusts the suspension for various loads with Progressive Air Shocks. Using a magnetic sensor, AccuRide knows exactly how much to "air up" or "air down" the shocks depending on the load. This allows the trike to always be at the correct ride height, with no need for manual
An option that we offer and highly recommend is our four degree raked triple trees. We move the front axle ahead to reduce the trail in the front end. Keep in mind that although they are called rake kits, the key aspect being changed is the trail. We are changing it from about 6.69" to 3". By doing this it acts like you have wider handlebars. This gives you more mechanical leverage to turn the bike.
A unique and cool option we have developed is our Electric Reverse System. This electric motor is not just a starter motor, but rather an extremely high torque 12V motor that goes through a gear reduction to produce huge torque. To operate the reverse, simply lift the lever
on the left side to engage
the electric motor's gear directly into the front of the belt's sprocket. One you've engaged the motor simply push and hold the bike's horn button down to back you up. When done, put the engagement lever back down and the horn button will be a horn button again.There is a safety built in so if you put the bike in gear while the lever
is up, the horn sounds! You'll
probably only do that once.
Blends the retro inspired body lines of the HDTR while providing some very practical features at the same time. Mounted with heavy duty steel brackets and finished with a sleek ABS plastic insert, creating a weight-bearing place to mount the trike.
This option for our HDT kits protect your feet from the elements and really add to the style of your trike. They are constructed of heavy duty fiberglass. We mount/support them with a bar that runs from the front of the bikes frame to our frame in the rear, so they are super strong. We also install a non-skid material where your feet could touch.
A full 3-gallon fuel capacity and separate filler neck allowing for long distance range and rapid fill. The system also features an “on-the-fly” transfer system, with the push of a button, all 3-gallons can transfer to the main tank in a matter of minutes.
See more info on this option here
The Roadsmith conversion comes standard with a 5/8" sway bar, but this option increases it to a 3/4" bar designed for more performance handling. This is also a good option for trikes with passengers or heavier loads..
If you wish to keep your ABS, this
system Integrates with the stock set
up on the bike and functions in the same manner.
You can have matching front and rear wheels by ordering our custom wheel package. This Forged 18" chrome rim is made for us by Performance Machine and includes a new tire. This package also includes the rear chrome wheels pictured below.
You can brighten up your wheels with this 16" x 7" chrome rim option. They are a 5x4.5" bolt pattern with a positive 35mm offset. Also available in a 17" option.
To match the front wheel on the 2014 and newer Harley Davidson Rushmore models.
72 spoke Dayton wire wheels. True knock off style for that old school look.
This is an onboard, continuous wheel balancer made by Centramatic. This option increases front tire life 35%-50%, and reduces hand fatigue on those long rides.
If your front tire has a white wall, you should have matching tires in the rear, right? We offer them with fat 1 1/2" white walls, thin 3/8" white walls, or for the 2009's a 3/16" thin white wall. The tires are specially made to our specification. The 215/55-16 tires are Formoza FD1's. They will fit a 16" or 17" rim.
These spoilers look nice on top of the fenders by adding some more detail. They also have LEDs in them that are a running light and a brake light.
Add protection to your rear end with our Nerf Bumper. This 1 1/2" chrome plated tube with capped ends is solidly mounted to the trike frame. If you "bump" into it, it's OK.
These ingenious items will magically make the rider behind you happier in a rain storm. Mounting hardware included.
These mudflaps will not only prevent that big rooster tail from soaking your buddies behind you, they have 6" Roadsmith LED lights in them that function as running and brake lights. Mounting hardware included.
This is a 3/8" stick on trim that goes around your wheel opening. It just finishes off the look nicely.
Protect your trike on its off days with this cover made of water resistant, rip-stop nylon.
Your kit already comes with the receiver hitch, but this is the drawbar you'll need to actually tow.
This harness actually plugs right into the factory harness to give you a flat four connector for your trailer.