Every HCS 'R' 1800 Roadsmith Trike is built with the attention and
craftsmanship needed to be a true extension of the Honda™ motorcycle itself. Take a closer look and you will see what we mean.
Designed for the VTX1800R and S model. Have a fun, on a worry-free ride.
The smooth ride of the Roadsmith HSCR 1800 is primarily due to our innovative suspension system that offers a ride like no other trike. The Trike Shop was the first to offer Independent Suspension for trike conversions over 20 years ago. The cynics said it would never work. They’re eating those words today. Talk to anyone who has actually ridden an Independent Rear Suspension and a solid axle system trike for a period of time and ask them which one rode better. You can’t deny Independent Rear Suspension is the way manufacturers of cars, SUV’s and ATV’s are going. Trikes are no different. These trikes are built with a purpose- “Comfort”.
The multi-point mount of the chassis to the bike frame actually strengthens the bikes frame as well as dissipates the added stress of a trike. We attach it to the existing mounting points on the frame; on the HSCR 1800 we use the swingarm pivot and the shock mounts. A feature of the trailing arm type independent suspension is the fact that there are very few moving parts. There are literally only two pivot points on each trailing arm. This eliminates any adjustments or maintenance requirements. There are more complicated way’s to design a suspension, but why?
The stabilizer bar, also known as a sway bar, is a flexible link between the two trailing arms. The bar uses the torsion effect to always try to keep the trike righted, or sitting square to the ground. The beauty of the stabilizer bar is the fact that when one wheel hits a bump, the bar can flex quickly to absorb the movement then return. This is the same technology used in almost every vehicle today. Just think if you had “no lean”. This means your trike is always perfectly square to the ground. In effect, if you go over a 2” bump with your right wheel, the trike rocks up 2”. But with Independent Suspension, just that wheel goes up. The antiquated solid axle system is only made today because it’s cheaper and easier. Technology has improved a lot in the short history of trike conversions but some are too stuck in their ways. We offer only the most innovative designs to our customers.
We increase the wheelbase on all of our conversions. This puts the rear wheels back behind the passengers’ seat area rather than sitting right on top of the wheels. Any vehicle that has a longer wheelbase will have a smoother ride, it’s just common sense. As an added benefit, the differential being farther back reduces the driveshaft angle.
Our differential is constructed from standard automotive ring and pinion gear sets. The original application of our differential was a Jeep. We cut down this cast iron housing and make an Independent Suspension differential out of it. The components inside of it are all new, including the 3.55:1 ratio ring and pinion. We make the gear ratio slightly
deeper to retain the impressive power of this monster.
Large disc brakes more than handle the stopping of this trike. Remember trikes stop faster and easier than bikes. With more tire contact area and much better stability, braking a trike is not the white knuckled balancing act that a bike can be. The wheel bearings, calipers and rotors are all from a high production automobile application known as the VW Beetle. Like all of our constructed drive train, we use everyday parts off the shelf for your convenience.
We manufacture a completely new driveshaft built from full size sealed automotive u-joints and a 2” tube. These are the same components used in full sized cars and trucks. We figure if that design can hold up in those heavy vehicles it should have no problems with a trike application.
The axles are custom made for our conversion kits, but the constant velocity (CV) joints are standard automotive applications such as VW and Porsche. We use automotive type parts for all of our drive train because it’s designed for a much heavier load, meaning these parts will probably last forever in this light duty application. Again using off the shelf parts for your convenience.
The Alloy wheels that come with our conversion kits are clear-coated aluminum rims that have a similar look and finish to the bikes front rim. They are a 16x7”, 5x4 1/2 positive 35mm offset size that fits many automotive applications. We also offer a Chrome plated option.
The storage compartment comes completely carpeted to both protect and store your riding gear. The trunk stores about 4.5 cubic feet of goodies. Compared to the stock bike (which has none) this compartment is truly welcome. The large trunk door opening also allows for easier packing or loading, especially with it's industry first single handed trunk door opening operation.
The slick body design incorporates the look and feel of the original motorcycle. We feel the trike conversion body should melt seamlessly into the original body parts. The body is constructed of heavy-duty fiberglass. It is then painted with urethane paint, flat sanded, and buffed to a mirror finish to ensure a perfect paint match both in color and finish.
The mounting system for the body
ensures a rock solid attachment and no
exposed mounting hardware. ( Shown with
a HD tour pack )
With any touring machine a trailer hitch is a familiar sight. When riding a trike a trailer is not a danger like it is on a bike. The trike will never feel like there’s a trailer back there, so we include a 1 1/4” receiver for a trailer hitch neatly tucked under the body. It is incorporated into the rear body support and is welded directly
into the strongest part of our frame.
The Trike Shop has an unparalleled history of customer service and satisfaction, and we put it in writing, with the best warranty in the market. Your trike comes with a full 3 year or 1,000,000 mile warranty on the entire trike kit. We can offer this because we know with over 14 years of producing this type of conversion kit, we do it right the first time.
|Wheelbase|| 79" with steering kit |
|Overall length|| 111" with steering kit |
|Overall width||56" at the body|
|Weight|| 1070 lbs wet |
|Storage|| 27" wide x 14" high opening x 15" deep |
|Suspension|| Lateral trailing arm Independent Rear Suspension |
|Stabilizer bar|| 5/8" bar to control body roll (3/4" Option) |
|Tires, rear|| 215/55-16 radial |
|Rims, rear|| 16x7 alloy 5x4 1/2 35mm offset |
|Final drive ratio||3.54:1|
|Brakes, rear|| dual piston calipers |
|Shocks|| adjustable coil over |
|Body material|| polyester resin fiberglass |
|Drive system||2" diameter shaft w/ sealed u-joints|
The Roadsmith 6 degree steering kit is an option that most people get, if not initially, someday. The VTX1800 needs a rake increase to make for a comfortable and stable trike. To explain what a steering kit does is complicated. It basically feels like power steering for your trike. It reduces the steering effort by about half. The front-end geometry for a motorcycle is designed with a certain amount of trail in the front end to allow the bike to counter steer easy and remain stable. As a trike we are not counter steering,
but rather steering. That is the opposite of what the front
end was designed to do. With our steering
kit, we reduce the trail in the front end to give you
better leverage at the handlebars to steer your
trike. It gives you better mechanical advantage
to turn the front wheel off of center. It’s like your handlebars are twice as wide as they really are. This can positively affect your fatigue level at the end of a long day.
This handy new option
cornering performance, and also helps reduce unwanted body roll that can come from heavy loading or riding with a passenger.
Cobra slash-cut slip-ons. Let them hear that the hottest trike on the block is coming.
You can brighten up your wheels with this 16" x 7" chrome rim option. They are a 5 x 4 1/2 bolt pattern with a positive 35mm offset.
Our chrome nerf bumper adds both protection and classic look to the back of your Roadsmith. This bumper is constructed of 1 1/2" steel tubing with caped ends then fully polished and chrome plated for years of everlasting luster. Functionally, the solid 5/8" bar bolts directly to the trike's frame.
These ingenious items will magically make the rider behind you happier in a rain storm.
These mudflaps will not only prevent that big rooster tail from soaking your buddies behind you, they have 6" Roadsmith LED lights in them that function as running and brake lights.
This is a 3/8" stick on trim that goes around your wheel opening. It just finishes off the bike nicely.
Protect your trike on its off days with this cover made of water resistant, rip-stop nylon.
This ABS fairing with chrome mounting bracket mounts beautifully on the trike. It houses a standard DIN chassis automotive radio and 4" speakers. Available in raw, or painted finish.
This harness actually plugs right into the factory harness to give you a flat four connector for your trailer.
The trike conversion already
comes with a built in receiver for
a trailer hitch. This is the draw bar
you'll need to actually tow.
Click on the appropriate link to download a pdf file of installation instructions